 |
Name: Aotea Square Seating
Specifications: Purple Heart Bentwood Seating
Description: Purple sections were bent to suit the curve of the Back in both directions
Routered lines using 11FC to give the appearance specified
Each seat [4 in number ] were 4m long
All S/S section was machined in a manner to ensure the actual joints [2 pcs] were tight
Product was then coated witjh a UV and Graffiti product for protection |
 |
Name: Aotea Seating
Specifications: Purple Heart... large section timbers
Description: Joinery of varying sizes to compliment the Designer Specifications..
S?S fitting to ensure longivity and protection along with the protective coatings
|
 |
Name: Aotea Curved Bendwood Seats
Specifications: Purple Heart Bentwood Seating
Description: Manufactured to Designers Specs |
 |
Name: Exterior Joinery
Specifications: Yellow Cedar 2.4m high French Doors
Description: The following pics will show a series of components and the finish product .... exported to Melbourne...
All curved components are Bent using Yellow Cedar supplied by Herman Pacific |
 |
Name: Joinery
Specifications: Detailed Corner Pic of Doors
Description: Yellow Cedar showing Curved Components... Yellow Cedar supplied by Herman Pacific |
 |
Name: Joinery
Specifications: Yellow Cedar 2.4m high French Doors
Description: Yellow cedar supplied by Herman Pacific |
 |
Name: Exterior Joinery
Specifications: Curved Solid Yellow Cedar Components..
Description: Glazing Bars & Beads... Yellow Cedar |
 |
Name: Pivot window [all sizes available]
Description: Tan Pine... this has a finished 140x32mm Jamb section with a Pivoting Sash... Brass components..Both Circles are made from the true half lap system providing incredile strength and stability of Shape... machined inner gioves the accuracy so the Sash just 2mm clearance all around allowing for the 2 x weather strips... Stops for the Sash allowing a Pivoting motion plus drain trench etc to ensure absolute weather tightness |
 |
Name: Gothic Curved Joinery
Specifications: NZ Pine shaped to specifications
|
 |
Name: Joinery components
Specifications: Bent Yellow Cedar [40x45] Component
Description: Timber Supplied by Herman Pacific |
 |
Name: Round Window
Specifications: 400mm O/D Round with Facings, Glazing Bars
Description: - 140x32x400mm Diameter round..
- Architraves were 60x10mm with 90x20 facings
This is the tightess Architraves possible in a 'profiled shape'
|
 |
Name: XN6 Door beads
Specifications: XN6 Front Door
Description: The 'curved Beads are bent then machined out of Solid Timber'
This is a Hume Doors 7 Timber Australia product |
 |
|
 |
Name: Joinery / Seating Component
Specifications: 45x 45mm Rt Angle half Elliptical shape
Description: 2 x these joined in the centre would give a Elliptical Shaped window" target="_blank">2 x these joined in the centre would give a Elliptical Shaped window / flat base...Both Sashs and Jambs could be made to suit [Jambs Ex 150x32 & Sash if required 32x40-45mm]
Architraves / facings all made to suit... Yellow Cedar supplied by Herman Pacific |
 |
Name: PIVOT 900mm dia
Specifications: see description next pic
|
 |
Name: XN6 Front Doors
Specifications: Two Fronts with XN6 Curved beads by Woodform
|
 |
|
 |
Name: XN12 Glazing Beads
Specifications: Bent using Meranti
Description: XN12 Side Light is a Hume Doors & Timber Australia product...
Woodform Supplies all curved beads for their Front Door Range |
 |
Name: PIVOT WINDOW [all sizes available]
Specifications: 900mm dia pivot round window with opening SASH
Description: Tan Pine... this has a finished 140x32mm Jamb section with a Pivoting Sash... Brass components..Both Circles are made from the true half lap system providing incredile strength and stability of Shape... machined inner gioves the accuracy so the Sash just 2mm clearance all around allowing for the 2 x weather strips... Stops for the Sash allowing a Pivoting motion plus drain trench etc to ensure absolute weather tightness |
 |
Name: Pivot Window
|
 |
Name: Gothic 1
Specifications: Pine Curved to specifications [all dimensions available]
Description: Tanilised Pine Outer Eyebrow with the inner Jambs bent to suit
Sections Eyebrow 90 x 60mm
Jamb 160 x 44mm |
 |
Name: Gothic 1
Specifications: Pine Curved to specifications [all dimensions available]
Description: As previous |
 |
Name: Gothic Curved Joinery
Specifications: NZ Pine shaped to specifications
Description: - Both Jambs, Facings, Sashes and Eyelids manufactured to suit
|
|
