 |
Name: Curved Wall
Specifications: Curved Wall Sysytems in kwila [other species available]
Description: 40 x 19mm section kwila bent to the wall radius
Horizonal sections are 'free-formed' drilled and screwed to the frame... a simple method is to insert ea end into a 'C' section of Aluminium verticall and rebate into the vertical timber then drill and screw into already installed verticals...
NB: 1. Seating can be manufactured to suit almost any curve at the base of a wall refer... Exterior Seating
2. This product maybe used as an Interior Screen... a variety of curves are available... check interior... slatted screens |
 |
Name: Bendy wood
Specifications: 48mm Dowel
Description: Manipulate the timber to the curve |
 |
Name: Bendy wood
Specifications: 48mm Dowel
Description: Bent on site to the required position |
 |
Name: The HUB SPIRAL
Specifications: Curved Solid Yellow Cedar Components..
Description: All 80 x 100mm section made into a SPIRAL 12 mitres long |
 |
Name: The HUB SPIRAL
Specifications: Curved Solid Yellow Cedar Components..
|
 |
Name: The HUB SPIRAL
Specifications: Curved Solid Yellow Cedar Components..
Description: Jointed thru the SPIRAL.... no room for error |
 |
Name: Curved Decking
Specifications: Bent on Edge Kwila Decking
Description: This project required alot of skill.. to 'bend' anything on edge
is not possible, extruding is but not with Wood...
Similarly our production method to manufacture Architraves is to cut from Solid.
To bend the Decking as seen, radii and widths of timber had to be choosen prior to Design completion. The Kwila was
'Free-formed' supplied in Bags and fixed directly on site, drilled and nailed.
In each radius section of the deck the widths of boards differed at the smallest radii, flowing to the outer radii/front step of the section. This change in widths achieved a very UNIQUE concept and Design for the Architect
|
 |
Name: Curved Decking
Specifications: Kwila Bent on Edge
Description: All product here is ex 100x25mm Kwila, drilled and copper nailed |
 |
Name: Curved Slatted Panels
|
 |
Name: Curved Slatted Panels
|
 |
Name: Hand Carved piece
Specifications: American Oak
Description: The two Hand carved pieces installed |
 |
Name: Hand Carved piece
Specifications: American Oak
Description: This is the same piece installed |
 |
Name: American OAK
Specifications: handcarved to profile 180x65mm
Description: Ted the 'Carver' these unique abilities make this possible... no woodbending here. The best in NZ hand carving.. American oak to a very specific profile |
 |
Name: Curved Wall Systems
Specifications: Curved Kwila Walls
Description: see description on other picture |
 |
Name: Art Sculpture
Specifications: 180 x 32mm Ribbon Freeformed 200m of
Description: A commission for Waiheke Island; John Gow Property. The Sculpture Park & Exhibitions.
Designer: Peter Nicholls
FREE-FORMED to suit the contours of the property. Hung on individually sprung post giving a total flexibility thru 180 deg on two planes..a half Sphere.
The Ribbon effect has been created over the total metres..well worth a visit.
|
 |
Name: Art Sculpture
Specifications: Designer: Peter Nicholls
Description: The Sprung Posts stragetically placed to acomodate the curves and contours of the property |
 |
Name: Art Sculpture
Specifications: Designer: Peter Nicholls
Description: Majestically hung |
 |
Name: Art Sculpture
Specifications: Designer: Peter Nicholls
Description: Weaving amongest trees |
 |
Name: Art Sculpture
Specifications: Designer: Peter Nicholls
Description: Components FREE-FORMED ready to be assembled on site |
 |
Name: Exterior Gazebo
Specifications: All Bentwood Lattice 35x12mm Cedar
Description: Bending & Joinery of this Lattice was achieved in house..
Impregnation of the Cedar then Free-Forming allowing the Complex Bending...
Under the Lattice a polycarbonate layer for water-proofing |
 |
Name: McConnells Sculpture Park
Specifications: Freeform Components by Woodform Design Ltd
Description: See description in the finished pic...Red |
 |
Name: Sculpture Mc Connells Sculpture Park, Wa
Specifications: Freeform Components by Woodform Design Ltd
Description: 200 lm of timber, NZ Pine 150x40mm bent in a 'double-ribbion' througout the natural terrain... on the Mc Connell Sculpture Park
To accomodate the angles length & weight, the spring system as a linkage was developed to ensure that once shacken the 'ribbion' would vibrate/move the full length of the Sculpture |
 |
Name: The Carving
Specifications: This is part of the Paratai Dr Stairs
|
 |
Name: XN12 Glazing Beads
Specifications: Bent using Meranti
Description: XN12 Side Light is a Hume Doors & Timber Australia product...
Woodform Supplies all curved beads for their Front Door Range |
 |
Name: Mc Connells Sculpture Park
Specifications: Freeform Components by Woodform Design Ltd
Description: See description in the next pic... finished product in Red |
 |
Name: Circular Stairs
Specifications: Components; Carvings Ease Overs Handrail profiles
|
 |
Name: Bendy wood
Specifications: 48mm dowel
Description: 48mm dowel bent on site to suit |
 |
Name: Bendy wood
Specifications: 48mm Dowel
Description: From straight to position on site |
|
