 |
Name: THE ARC CHAISE LOUNGE
Specifications: Designed by Liam Mc Fadyen
Description: Two Opposing Arc's which slide thru on another to offer comfort and the sculptural appearance...
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: The ARC CHAISE
Specifications: Designer; Liam Mc Fadyen... two Arcs with extreme comfort
Description: Bentwood Bagasse is pinned together with S/S rods and Allen Key Cap Screws. The Top semi circle rolls in a complete Arc allowing the Person to sit and face in two different directions. The purpose of the rolling effect is to allow a more upright position or as you may fancy a more horizontial position. The comfort is sencond to none, trial and see. For transportation the top Arc can be undone and flipped over on top of the bottom Arc allowing a stable and freightable package, Internationally. DESIGNER: Liam Mc Fadyen |
 |
Name: THE ARC CHAISE LOUNGE
Specifications: NZ DESIGN:NZ TECHNOLOGY:NZ MADE
Description: The HILTON by the SEA; AUCKLAND NZ |
 |
Name: The ARC CHAISE
Specifications: Bentwood Solid Bagasse
Description: Comfort trials, waterfront Auckland NZ |
 |
Name: Jellicoe Wharf
Specifications: 570 x 190 x varying lengths PURPLE HEART
Description: Various lengths.. 2m to 21m seat made up using 190x190mm Squares of Purple Heart
Product was [a] cut to length, with a specialist saw / drilling system manufactured for
the project. [b] Bolted together using M12 [c] Routering of all edges and join lines with a 45Deg angle [d] With the use of 11FC Sika holes & the routered gaps were filled
Each 5m (570 x 190) weighing approx 600kgs
|
 |
Name: Jellicoe Wharf Seat
Specifications: 570 x 190 x varying lengths PURPLE HEART
Description: Part way thru manufcaturing... applying the 11FC Chaulking material to ensure no water /moisture egress into the joints or bolting systems |
 |
Name: Jellicoe Wharf Seating
Specifications: Installation of the 21m Seat
Description: On site installation.. 21m manufactured as interlocking components
Lifted into position and bolted into position..
|
 |
Name: Jellicoe Wharf Seating
Specifications: 45x45 section x various lengths
Description: Purple Heart 45 sq section jointed to achieve a 90 Deg angle with STRENGTH
|
 |
Name: Jellicoe Wharf Seats
Specifications: 45x45 section x various lengths
Description: Purple Heart 45 sq section jointed to achieve a 90 Deg angle with STRENGTH
With no Arms |
 |
Name: Aotea Square Seating
Specifications: Purple Heart Bentwood Seating
Description: Purple sections were bent to suit the curve of the Back in both directions
Routered lines using 11FC to give the appearance specified
Each seat [4 in number ] were 4m long
All S/S section was machined in a manner to ensure the actual joints [2 pcs] were tight
Product was then coated witjh a UV and Graffiti product for protection |
 |
Name: Aotea Seating
Specifications: Purple Heart... large section timbers
Description: Joinery of varying sizes to compliment the Designer Specifications..
S?S fitting to ensure longivity and protection along with the protective coatings
|
 |
Name: Aotea Curved Bendwood Seats
Specifications: Purple Heart Bentwood Seating
Description: Manufactured to Designers Specs |
 |
Name: CHCH CBD
Specifications: Vitex large profiles ... CNC machining
Description: - Vitex machined to Client Specifications
- Jointed and delivered for installation as a whole
|
 |
Name: BESPOKENZ
Description: The Label..... NZ FURNITURE |
 |
Name: WFD Retro 1
Specifications: A physically curved ply product ready for the Foam & Upholst
Description: This system of manufacture requires VERY LIMITED jigging, therefore nil cost as an entry for manufacture....no up front costs.... with the system, although limited a number of shapes can be created similarly |
 |
Name: BESPOKENZ
Description: An initiative created by the Directors of Woodform Design Ltd[manufacturers] & Rinke Design Ltd..
The Purpose is to make available at Retail level NZ Designed Product.... |
 |
Name: THE THOMAS CHAIR
Specifications: Designed by Becas Bartells
Description: The Thomas again has a Solid Timber Bentwood Arm... Both the Thomas & Samuel are designed as a Casual single or can be constructed into a two or three Seater
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: THE SAMUEL CHAIR
Specifications: Designed by Becs Bartells
Description: The Samuel has a distinct feature... the Bentwood solid timber canterlevered ARM gives this Design its very Unique characteristic appearance...
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: the 'Pellion' Chair
Specifications: An ALFRESCO / DINING Chair of exceptional design
Description: Designed by David Beuth, this Chair shows how given the ability combining Solid timber into shape and contrast of species produces the exceptional PRODUCT... made from Yellow Cedar & Purple Heart Dowel [timber supplied by Herman Pacific] with Stainless Steel 316 fittings it is built to last.... Watch this space, complimentry products... 8-10 seater table, attachable glass/book holder & a leg rest are to be produced...
|
 |
Name: Ski Bed 2
Specifications: Bentwood Side Rails
Description: Solid Timber Tas Oak, NZ Pine presently however all other species possible. Presently only manufactured for Australian Client; welcome NZ Manufacturing Option
|
 |
Name: Jail Beb
Specifications: Gullwing Shape
Description: 100x42mm Thick components are bent and formed, then split to 42x42 as individual Head Leg & Foot Components.. Drilled and threaded with a S/S rod and spacers to complete each end |
 |
Name: The Ski Bed
Specifications: Flat Section Side Rails with Curved Solids
Description: This Design shows the use of Curves in contemporary Classic
Components available in most Species |
 |
Name: Califorina
Specifications: A single casual chair design
Description: Designed and prototyped to test laminations comfort and strength.
Seen here in NZ Pine.
Interested in selling..Product components available...enquiry further |
 |
Name: Headboard Concept
Specifications: Leg System for Headboards
Description: Development phase during the prototyping of this product |
 |
Name: The Chroll Chair
Specifications: Unique Design
Description: Bentwood Slats and Backs... enquire further re availability |
 |
Name: Orbis Chair by Akiem Furniture
Specifications: Ply laminate 25mm thick
Description: Pine Ply Laminate curved to an 1100 radius. A generic Woodform jig size |
 |
Name: Auditorium Seating by Tritec
Specifications: Curved Wood & Metal
|
 |
Name: provencal sofa
Specifications: Two seater, Manufactured here in NZ
Description: From picture to actual product... all solid timber machining and Joinery by the Woodbenders. Total Frame manufacture, including CARVING..
This product is available to view at Designer collection Newmarket, Auckland. Attn: Rod |
 |
Name: French Savoy & Stool
Description: Totally Manufactured here in NZ.. Scaled form the original, we Woodform Design Manufacture the Frames to specifications required...This product is available to purchase ex 'THE DESIGNERS COLLECTION' Newmarket, AKL NZ... ph 09 3077839 |
 |
Name: The City Design
Specifications: A bentwood Chair Back
Description: Clean simple lines utilising Metal and Wood |
 |
Name: the 'Pellion' Chair
Specifications: An ALFRESCO / DINING Chair of exceptional design
Description: Designed by David Beuth, this Chair shows how given the ability combining Solid timber into shape and contrast of species produces the exceptional PRODUCT... made from Yellow Cedar & Purple Heart Dowel [timber supplied by Herman Pacific] with Stainless Steel 316 fittings it is built to last.... Watch this space, complimentry products... 8-10 seater table, attachable glass/book holder & a leg rest are to be produced...
As a family of product, Woodform is working with Designers to produce other products using the same component... |
 |
Name: the 'Pellion' Chair
Specifications: An ALFRESCO / DINING Chair of exceptional design
Description: Designed by David Beuth, this Chair shows how given the ability combining Solid timber into shape and contrast of species produces the exceptional PRODUCT... made from Yellow Cedar & Purple Heart Dowel [timber supplied by Herman Pacific] with Stainless Steel 316 fittings it is built to last.... Watch this space, complimentry products... 8-10 seater table, attachable glass/book holder & a leg rest are to be produced...
|
 |
Name: Bentwood Furniture Components 1
Specifications: 30 x 30 x Specified shape
Description: Pine bentwood, laminated with Euro Beech show-wood
Supplied with all machine components ready to assemble |
 |
Name: French Provencal Sofa
Description: This is totally NZ Made.... yes scaled from the original Italian / French product, we have manufactured using European Beech the Frame... handcarved by Tedd to specifications requested
These Sofa's can be purchased from 'The DESIGNERS COLLECTION' Newmarket... ph 09 307 7839 |
 |
Name: Savoy & Ottaman
Specifications: NZ manufacture complete
Description: Total Frames manufactured from picture including CARVING..
These products are available to view at Designer Collections, New Market. attn : Rod |
 |
Name: The PELLION CARVER
Specifications: Designed by David Beuth
Description: The Pellion seen here as a Carver or Arm less Chair was designed for both Alfresco and Internal Dining Areas
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: Auditorium Seating by Tritec
Specifications: Curved Wood & Metal
Description: Strength and comfort... design by Tritec, Wellington
Woodbenders supply all the Timber Components |
|
