 |
Name: Circular Stairs
Specifications: The Carving
|
 |
Name: Bendy wood
Specifications: 48mm Dowel
Description: Manipulate the timber to the curve |
 |
Name: Bendy wood
Specifications: 48mm Dowel
Description: Bent on site to the required position |
 |
Name: Hand Carved piece
Specifications: American Oak
Description: The two Hand carved pieces installed |
 |
Name: Hand Carved piece
Specifications: American Oak
Description: This is the same piece installed |
 |
Name: Circular Stair Components
Specifications: 50mm Dowel Sections Southland Beech
Description: These have been cut from Solid timber, to illiminate all visual glue lines... bending this from Solid is beyondn our abilities.
There are limitations |
 |
Name: American OAK
Specifications: handcarved to profile 180x65mm
Description: Ted the 'Carver' these unique abilities make this possible... no woodbending here. The best in NZ hand carving.. American oak to a very specific profile |
 |
Name: Circular Stair
Specifications: Components
|
 |
Name: StairComponets / Handrails
Specifications: Finished profiled Handrail, Easings, Carving, Ease-overs
Description: This profile was designed specifically for the client, site consultation required; matching existing Balustrades, template manufacture for Easings and Handrail Radii, Risers and Goings.
The Sculptural piece seen herer was by request, hand carved |
 |
Name: Curved Dowels Stir Components
Specifications: Cut from Solid.. European Beech 45mm
Description: Ideally cutting from Solid to elliminate all visual lamination lines |
 |
Name: The Carving
Specifications: This is part of the Paratai Dr Stairs
|
 |
Name: Stair Tread Component
Specifications: 45x45mm right Angle used for Stair treads
Description: A series of these as the tread with one side straight 1.0m long and the uprights cut and angled to hold the Hand Rail... a schollaped 50mm radius on the top of the 45x45 sections allow the 50 Dowel Ahndrail to Glue / fix to the upright....this system can also be made for a Curved Staircase
The Very BEST DESIGN for STAIR TREADS & Handrails... Designers / Architects Kebbelldaish, Wellington Auckland |
 |
Name: Stair Tread Component
Specifications: 45x45mm right Angle used for Stair treads
Description: please read the pics discription on the previous photo |
 |
Name: Circular Stairs
Specifications: Components; Carvings Ease Overs Handrail profiles
|
 |
Name: Bendy wood
Specifications: 48mm dowel
Description: 48mm dowel bent on site to suit |
 |
Name: Bendy wood
Specifications: 48mm Dowel
Description: From straight to position on site |
|
