 |
Name: The ARC CHAISE
Specifications: Designer; Liam Mc Fadyen... two Arcs with extreme comfort
Description: Bentwood Bagasse is pinned together with S/S rods and Allen Key Cap Screws. The Top semi circle rolls in a complete Arc allowing the Person to sit and face in two different directions. The purpose of the rolling effect is to allow a more upright position or as you may fancy a more horizontial position. The comfort is sencond to none, trial and see. For transportation the top Arc can be undone and flipped over on top of the bottom Arc allowing a stable and freightable package, Internationally. DESIGNER: Liam Mc Fadyen |
 |
Name: The ARC CHAISE; design systems
Specifications: Development of the seating position
Description: Sitting or lying to establish the correct curves required |
 |
Name: The ARC CHAISE; design systems
Specifications: Development of the seating position
Description: Individual prototypes were constructed to establish the correct Radii of the Curves required before manufacture |
 |
Name: The ARC CHAISE; design systems
Specifications: Roller systems
Description: Prototype of the ARC Chaise identifying the roller systems required for the smooth transition of the curves altering the sitting position |
 |
Name: The ARC CHAISE; design systems
Specifications: The Sculptual appearance
|
 |
Name: Jail Beb
Specifications: Gullwing Shape
Description: 100x42mm Thick components are bent and formed, then split to 42x42 as individual Head Leg & Foot Components.. Drilled and threaded with a S/S rod and spacers to complete each end |
 |
Name: Curved Seating ...
Specifications: The Fan Seat System with Straight
Description: Kwila ... solid timber bent to suit the Design... the straight is added to compliment |
 |
Name: The Surf Seat
Specifications: Solid Jarrah ex 75mm thick
Description: Solid Jarrah ex 75mm thick...This shape has been machined. Rather than laminating it was decided to use solid timber.. these are situated in the Whangarei Shopping facing north with extreme UV/heat laminations issues, glue failure over time would have created major degradation |
 |
Name: Orbis Chair by Akiem Furniture
Specifications: Ply laminate 25mm thick
Description: Pine Ply Laminate curved to an 1100 radius. A generic Woodform jig size |
 |
Name: The ARC CHAISE; design systems
Specifications: Roller systems
|
 |
Name: The ARC CHAISE; design systems
Specifications: Stainless Steel Cap Screw Fitting
Description: Method and joinery technology enabling the ARC to be disassembled for transporting |
 |
Name: Curved Headboard Attachment
Specifications: The Metal Bracket [adjustable height]
Description: The Bracket holds the Mattress sercurely in position, added
strength for the stability with the Screw into the back of the Mattress Base. |
 |
Name: Panel Shape
Specifications: Ply Laminate with Solid Timber insert
Description: This complicated ply / solid laminate, allows Incredible Flexibility in Design...
All shapes will require new jigging. The system allows for no flexibility in shape.
Contact us to discuss |
 |
Name: Ply Laminate with Solid Timber insert
|
 |
Name: Headboard Concept
Specifications: Leg System for Headboards
Description: Development phase during the prototyping of this product |
 |
Name: The Ski Bed
Specifications: Flat Section Side Rails with Curved Solids
Description: This Design shows the use of Curves in contemporary Classic
Components available in most Species |
 |
Name: The 'e Chair'
Specifications: Complete ready for Production
Description: Treated NZ Pine, Stainless Steel screws |
 |
Name: The e Chair Carrycase
Specifications: Heavy Cotton zipped along the Length
Description: Not in production.. this Design/product along with 'The e Chair'
was prototyped as an exercise to establish the use of the Bentwood Leg... all proceedures & components are presently in place..
Enquiries as to the Selling/Marketing of this NZ Design would viewed very favourably..
Enquiries as a product to Market/sell |
 |
Name: The e Chair
Specifications: Design Concept Drawings
|
 |
Name: The 'e Chair'
Specifications: Design Concept Drawings1
|
 |
Name: The 'e Chair'
Specifications: Design Concepts... The Label
|
 |
Name: The 'e Chair'
Specifications: Fold away, excellent storage or carrying options
|
 |
Name: Califorina
Specifications: A single casual chair design
Description: Designed and prototyped to test laminations comfort and strength.
Seen here in NZ Pine.
Interested in selling..Product components available...enquiry further |
 |
Name: Kent 1
Specifications: A Casual Lounger
Description: Individual programming of parts, slipped slightly when attaching creates shape
The specialist programming and CNC cutting [each part numbered] allows for the
what seem impossible.. any shape can be achieved
What is displayed is 1 half of the Lounger
This is the 3rd prototype and now a production model has been achieved
Congratulations Kent... we hope for continuing success |
 |
Name: the 'Pellion' Chair
Specifications: An ALFRESCO / DINING Chair of exceptional design
Description: Designed by David Beuth, this Chair shows how given the ability combining Solid timber into shape and contrast of species produces the exceptional PRODUCT... made from Yellow Cedar & Purple Heart Dowel [timber supplied by Herman Pacific] with Stainless Steel 316 fittings it is built to last.... Watch this space, complimentry products... 8-10 seater table, attachable glass/book holder & a leg rest are to be produced...
|
 |
Name: THE THOMAS CHAIR
Specifications: Designed by Becas Bartells
Description: The Thomas again has a Solid Timber Bentwood Arm... Both the Thomas & Samuel are designed as a Casual single or can be constructed into a two or three Seater
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: Curved Headboard Leg Attachment
Specifications: Panels Laminated [MDF, Ply with Veneers]
Description: The bentwood attachment system of the Legs required to give the Mattress stability and still allow attachment of the Headboard via the Standard Screws to the Base |
 |
Name: the 'Pellion' Chair
Specifications: An ALFRESCO / DINING Chair of exceptional design
Description: Designed by David Beuth, this Chair shows how given the ability combining Solid timber into shape and contrast of species produces the exceptional PRODUCT... made from Yellow Cedar & Purple Heart Dowel [timber supplied by Herman Pacific] with Stainless Steel 316 fittings it is built to last.... Watch this space, complimentry products... 8-10 seater table, attachable glass/book holder & a leg rest are to be produced...
|
 |
Name: THE SAMUEL CHAIR
Specifications: Designed by Becs Bartells
Description: The Samuel has a distinct feature... the Bentwood solid timber canterlevered ARM gives this Design its very Unique characteristic appearance...
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: The Coat Hanger Component
Specifications: Ply Laminate over a Solid Jarrah Insert
Description: Imagine a compoonent cut in half thru the centre of the Jarrah Insert and then Jointed to make a CHAIR |
 |
Name: The Coat Hanger Component
Specifications: Ply Laminate over a Solid Jarrah Insert
Description: 2 x 3mm ply laminates over the cut from solid Jarrah [180x16mm] insert... incredibly difficult.. matching the lamination at the ends of the Jarrah Insert no gaps...
ALSO in full size a component system capable of using in a 2 piece Chair... WORLD's FIRST |
 |
Name: the 'Pellion' Chair
Specifications: An ALFRESCO / DINING Chair of exceptional design
Description: Designed by David Beuth, this Chair shows how given the ability combining Solid timber into shape and contrast of species produces the exceptional PRODUCT... made from Yellow Cedar & Purple Heart Dowel [timber supplied by Herman Pacific] with Stainless Steel 316 fittings it is built to last.... Watch this space, complimentry products... 8-10 seater table, attachable glass/book holder & a leg rest are to be produced...
As a family of product, Woodform is working with Designers to produce other products using the same component... |
 |
Name: provencal sofa
Specifications: Two seater, Manufactured here in NZ
Description: From picture to actual product... all solid timber machining and Joinery by the Woodbenders. Total Frame manufacture, including CARVING..
This product is available to view at Designer collection Newmarket, Auckland. Attn: Rod |
 |
Name: Savoy & Ottaman
Specifications: NZ manufacture complete
Description: Total Frames manufactured from picture including CARVING..
These products are available to view at Designer Collections, New Market. attn : Rod |
 |
Name: The PELLION CARVER
Specifications: Designed by David Beuth
Description: The Pellion seen here as a Carver or Arm less Chair was designed for both Alfresco and Internal Dining Areas
A BESPOKE NZ product abvailable to purchase from RINKE DESIGN LTD
Newmarket AKL, NZ www.rinkedesign.com p. 09 522-2163 |
 |
Name: THE ARC CHAISE LOUNGE
Specifications: THE WOODBENDERS SIGNATURE PIECE
|
 |
Name: WFD Retro 1
Specifications: A physically curved ply product ready for the Foam & Upholst
Description: This system of manufacture requires VERY LIMITED jigging, therefore nil cost as an entry for manufacture....no up front costs.... with the system, although limited a number of shapes can be created similarly |
|
